| NMT NMT master |
| Error control Node guarding |
| Boot-up Yes |
| Node ID range None |
| Node ID Hardware switch |
| CANopen bit-rates n/a |
| Type of bit-rate adjustment None |
| RPDOs No |
| TPDOs No |
| PDO modes Event-triggered Synchronous (acyclic) |
| PDO linking No |
| PDO mapping Static |
| SDO server No |
| SDO client 1 |
| Emergency producer Yes |
| Emergency consumer No |
| Sync producer No |
| Sync counter No |
| Time stamp No |
| Additional functions None |
| CANopen version CiA 301 V 3.0 |
| Frameworks CiA 302 |
| Device profiles None |
| Certified No |
| Availability In stock |
Headquarters
Deutschmann Automation GmbH & Co. KG
PO Box 1108
DE-65516 Bad Camberg
Phone: +49-6434-94330
Fax: +49-6434-943340
Email: info@deutschmann.de
URL: http://www.deutschmann.de
All worldwide agents are listed on our website
UNIGATE® CANopen (master)-Profibus DP (slave) gateway
Communication can be split into seven layers, layer 1 to layer 7, in accordance with the ISO/OSI reference model.
The Deutschmann Automation gateways convert layers 1 and 2 of the corresponding bus systems. Layers 3 to 6 are blank, and layer 7 is converted in accordance with the configured mapping.
The gateway can be configured through the software Wingate® that is also supplied.
This gateway module from the UNIGATE range of Deutschmann Automation allows a coupling between ProfibusDP and CANopen.
Here the gateway on the CANopen side acts as a standard-compliant master and on the ProfibusDP side as a standard-compliant slave so that the problems that appear again and again (when coupling the CANopen device to a Siemens PLC with ProfibusDP) are solved.
Like all UNIGATE modules this gateway is also developed for the practical industrial use. It has nine LEDs available that allow the user an easy diagnosis.
Like the complete UNIGATE family, the gateway can be configured via the Windows software "Wingate®" that is available free of charge.