| NMT NMT master NMT slave |
| Error control Node guarding Heartbeat producer Heartbeat consumer |
| Boot-up Yes |
| Node ID range - |
| Node ID Proprietary |
| CANopen bit-rates - |
| Type of bit-rate adjustment - |
| RPDOs 512 |
| TPDOs 512 |
| PDO modes Event-triggered Triggered by event-timer Remotely-requested Synchronous (cyclic) Synchronous (acyclic) |
| PDO linking Yes |
| PDO mapping Variable |
| SDO server 127 |
| SDO client 127 |
| Emergency producer Yes |
| Emergency consumer Yes |
| Sync producer No |
| Sync counter No |
| Time stamp No |
| Additional functions None |
| CANopen version CiA 301 V 4.0.2 |
| Frameworks CiA 302 |
| Device profiles None |
| Certified No |
| Availability In stock |
Headquarters
Berghof Automationstechnik GmbH
Harretstr. 1
DE-72800 Eningen
Phone: +49-7121-894-0
Fax: +49-7121-894-100
Email: controls@berghof.com
URL: http://www.berghof.com
Germany
Berghof Automationstechnik GmbH
Niederlassung Mühlhausen
Thüringer Str. 62
DE-99974 Mühlhausen
Phone: +49-3601-4777-0
Fax: +49-3601-4777-10
Email: controls@berghof.com
URL: www.berghof.com
DC1000 dialog controller and human machine interface
The new DC1000 series dialog controller is a high performance controller and an operator panel which have fused to become a single device. Also the control and visualisation application have fused to a single software program. The DC1000 is the perfect basis for equipping complete machine series economically. Graduated advert sizes from the economical 5,7-inch monochrome advertisement right up to the brilliant 10,4-inch display with TFT technology: no wish remains unfulfilled. The DC1000 is equipped with the most important hardware interfaces of a powerful controller:
- Ethernet
- CAN network
- USB, serial links
- I/O bus
- Onboard adaptation for HMS Profibus card
- Onboard adaptation for I/O boards
Standard programming tools
As all cell controllers of the Berghof CANtrol series also the Dialog controller is programmed by Windows based programming tools. Depending on your specific requirements, choose IEC 61131-3 compliant PLC programming (Codesys) or the 'C' high-level language interface with direct access to the real-time operating system. We provide the tools to support you at all stages of software development.
Customisation
As all Dialog products, the Dialog controller is designed as a platform matching to the requirements of your application. Select your made-to-measure product with the fitting processor power, software, housing, and keyboard layout.