ECUcore - Insert-ready System on Module (SOM)
Pre-installed operating system
Integrated Development Environment
All from one source
Based on the accumulated experience of numerous customer projects, our ECUcore SOM combines a state-of-the-art hardware design with production-ready operating system and board support package pre-installed.
As a hardware base for our PLCcore modules, the ECUcore is programmable on OS level only while the PLCcore is programmable on OS-level (C/C++) and PLC-level (IEC 61131-3). Of course, our ECUcore starter kits include a fully featured Eclipse-based C/C++ Integrated Development Environment (IDE) to accelerate your application design.
Available complementary software components
- CANopen source code to support CiA 301/302/304 compliant application development
- Ethernet Powerlink source code
ECUcore-E660
The ECUcore-E660 is based on the Intel® Atom™ Processor E660T and is designed for use in extreme rugged environments. The ECUcore-E660 features two Gigabit Ethernet ports, a CAN port, three serial ports as well as USB and provides an integrated 4GB Solid State Drive, SATA and a broad range of peripheral I/O support.
For further information please visit:
http://www.systec-electronic.com/ECUcore-E660
ECUcore-9263
With our ECUcore-9263 we respond on growing requirements for HMI-enabled applications. Having in mind the ever present cost pressure and demands on performance, the ECUcore-9263 perfectly balances both. It provides a simple yet performance-optimized hardware platform combined with a production-ready, GUI-enabled operating system.
For further information please visit:
http://www.systec-electronic.com/ECUcore-9263
ECUcore-9G20
Based on a fast ARM9 CPU, the ECUcore-9G20 combines outstanding performance at comparably low cost. Besides Ethernet and CAN, the board provides 2 USB 2.0 host and USB device interfaces. The user-programmable FPGA allows for realizing time-critical I/O and peripherals on-board.
For further information please visit:
http://www.systec-electronic.com/ECUcore-9G20
ECUcore-5484
Targeting at applications that require high-speed data acquisition and real-time communication like Ethernet POWERLINK, the ECUcore- 5484 combines an on-board FPGA, fast CPU with performance optimized memory layout and a variety of communication interfaces.
For further information please visit:
http://www.systec-electronic.com/ECUcore-5484
ECUcore-5208
The ECUcore-5208 meets the requirements of typical low-end applications, such as point-of-sale and access control devices, providing numerous communication interfaces, a real time clock and NAND flash mass data storage.
For further information please visit:
http://www.systec-electronic.com/ECUcore-5208
ECUcore-1130
Equipped with 4 CAN interfaces, Fast Ethernet, 3 serial ports, and an on-board FPGA, the ECUcore-1130 is ideally suited for embedded control applications that require high computing power combined with complex networking abilities. A specially adapted PXROS-HR board support package provides a good starting point for own safety application development.
For further information please visit:
http://www.systec-electronic.com/ECUcore-1130
ECUcore-EP3C
The ECUcore-EP3C System on Module (SOM) is an extremely compact, product ready hardware and software solution that accelerates embedded Ethernet POWERLINK designs. With the ECUcore-EP3C SYS TEC extends the flexibility of existing SOM solutions to the silicon layer.
With using an FPGA instead a fixed microcontroller the functionality of the core and the corresponding board layout is now “reprogrammable” by the developer. The board provides up to 31 pins to implement custom functions such as DIO, PWM, SPI bus or Data Address Bus.
For further information please visit:
http://www.systec-electronic.com/ECUcore-EP3C
Complete Software Development Environment based on the GNU tool chain
- Enhanced Eclipse-based integrated development environment
- Optimizing ISO C/C++ compiler and flexible macro-assembler
- Powerful linker with complete control of section placement
- C/C++ runtime libraries for GNU/Linux and embedded systems • Source- and assembly-level debugger
- Comprehensive user documentation in HTML and PDF
Evaluation & Start-Up - the ECUcore Starter Kits
The ECUcore modules are designed to be plugged onto applicable Development Boards. Both, the module and Development Board are included in the Starter Kit. The Development Board contains standard I/O connectors, such like CAN, RS232, RS485, Ethernet RJ45, as well as user-programmable LEDs, push buttons, switches, ADC, DAC and a patch field. The Development Board also provides the circuitry required for immediate start-up of the module, as well as other interface circuitry (e.g. BDM, JTAG) not provided on the SBC module itself. The SBC, when mounted on the Development Board, provides an excellent platform with which to evaluate controllers, develop software, as well as specify and determine the feasibility of new embedded designs.